Screwing The Reader Onto The Module Holder; Installing A Module Holder With Reader - Fujitsu CELSIUS R920 Operating Manual

Screwing the reader onto the module holder

2
a

Installing a module holder with reader

► Push the module holder into the casing in the direction of the arrow (1).
► Fasten the module holder with the screws (2).
► Connect the cables to the boards and the mainboard. Make sure the polarity is correct.
► Close the casing (see
The fan for the processor and the card holder must be removed so
that the data cables can be routed.
Fujitsu Technology Solutions
2
a
1
"Closing the casing", Page
► With the component side facing downwards,
slide the reader in the direction of arrow (1)
into the guide on the module holder (a).
► Fasten the reader with the screws (2).
2
2
1
34).
System expansions
39