System expansions
Screwing the reader onto the module holder
2
Installing a module holder with reader
► Push the module holder into the casing in the direction of the arrow (1).
► Fasten the module holder with the screws (2).
► Connect the cables to the boards and the mainboard. Make sure the polarity is correct.
► Close the casing (see
40
2
a
1
a
"Closing the casing", Page
► With the component side facing downwards,
slide the reader in the direction of arrow (1)
into the guide on the module holder (a).
► Fasten the reader with the screws (2).
2
2
1
35).
Fujitsu Technology Solutions