Table of Contents
Advertisement
TRENDnet User's Guide
Event
Motion Detection
Set up how the motion detection event will be triggered and what actions will
be triggered.
Motion Detection
Channel No.: Select the channel you would like to configure.
Enable Motion
Check this box to enable motion detection. Click
Detection:
Save to save the choice.
Enable Dynamic
Check this box to enable dynamic motion analysis
Analysis for
that shows the current status of motion detection.
Motion:
The motion tracking is displayed with grids. The grid
area represents the camera motion is happening.
Click Save to save the choices.
© Copyright 2019 TRENDnet. All Rights Reserved.
Area Settings
Area Settings
Configuration: Click the drop down and select Normal or Expert.
Configure the corresponding motion detection
parameters.
Normal Configuration
Normal Configuration
Draw Area/
Click this button to start/stop drawing directly on the
Stop Drawing:
image.
Clear All: Click this button to clear all the masking areas.
Sensitivity: Move the slider to adjust sensitivity. The greater the
value, the more sensitive. Default: 0
Click Save to save the changes
TV‐IP460PI
46
Advertisement
Table of Contents
