Table of Contents
Advertisement
TRENDnet User's Guide
Linkage Method
Linkage Method
Normal Linkage: Check the box to select everything in this category.
Send Email: Check the box to enable email to
be sent upon event detection.
Notify Surveillance Center: Check the box to
send an exception or alarm to the
management software when an event occurs.
Upload to FTP/Memory/NAS: Check the box
to capture and upload the image when an
alarm is triggered.
Trigger Recording: Check the box to trigger recording to the selected
storage device(s).
Click Save to save the changes
© Copyright 2019 TRENDnet. All Rights Reserved.
Line Crossing Detection
Set up how the Line Crossing detection event will be triggered and what
actions will be triggered.
Area Settings
Line Crossing Detection
Channel No.: Select the camera you would like to configure.
Enable: Check this box to enable the line crossing detection
feature.
Area Settings
Line: Click the drop down and select which line you would
like to configure.
TV‐IP460PI
50
Advertisement
Table of Contents
