Table of Contents
Advertisement
TRENDnet User's Guide
Private Mask
1.
Check the checkbox of Enable Privacy Mask to enable this function.
2.
Click Draw Area.
3.
Click and drag the mouse in the live video window to draw the mask area.
Note: You are allowed to draw up to 4/8 areas on the same image. The
supported number of the areas vary with the camera model.
4.
Click Stop Drawing to finish drawing or click Clear All to clear all of the
areas you set without saving them.
5.
Click Save to save the settings.
© Copyright TRENDnet. All Rights Reserved.
Event ‐ Basic Event
You can configure the basic events by following the instructions in this section,
including motion detection, video tampering, alarm input, alarm output, and
exception, etc. These events can trigger the linkage methods, such as Notify
Surveillance Center, Send Email, etc.
Note: Check the checkbox of Notify Surveillance Center if you want the alarm
information to be pushed to PC or mobile client software as soon as the alarm
is triggered.
Motion Detection
Motion detection detects the moving objects in the configured surveillance
area, and a series of actions can be taken when the alarm is triggered.
In order to detect the moving objects accurately and reduce the false alarm
rate, normal configuration and expert configuration are selectable for
different motion detection environment.
TV‐IP1328PI
32
Advertisement
Table of Contents
