TRENDnet User's Guide
Calling a Preset position
In the PTZ control panel, select a defined preset from the list and click
preset.
The following presets are predefined with special commands. You can only call
them but not configure them. For instance, preset 94 is "Remote reboot". If you
call preset 94, the camera will powercycle.
Preset
Function
34
Back to origin
39
Day mode
40
Night mode
© Copyright 2019 TRENDnet. All Rights Reserved.
to call the
Preset Function
92
Set manual limits
93
Set manual limits
94
Remote reboot
TV‐IP460PI
16