Table of Contents
Advertisement
TRENDnet User's Guide
Time Settings
The accuracy of the system clock is important for scheduling and accurate
logging. You can synchronize the system time with your computer, or
automatically check the time accuracy with a network time server (NTP
server).
Automatic Update
NTP
Specify a time server (NTP server) to synchronize with.
Server:
(e.g. pool.ntp.org)
NTP Port: Specify the port for the NTP server specified above.
Interval: The time interval that the TV‐IP460PI will synchronize the
time with NTP server. Default: 1440 minutes (24 hours)
Manual Time Sync
Device Time: The system time of this camera.
Set Time: Click the calendar icon and manually select the date.
Check the Sync. with computer time to copy the time
from your computer.
Click Save to save the changes
© Copyright 2019 TRENDnet. All Rights Reserved.
Daylight Savings
Setup daylight savings.
Automatic Update
Enable DST: Check this box if your time zone has daylight savings.
Start Time: Enter the date that daylight savings starts
End Time: Enter the date that daylight savings ends
DST Bias Enter how much time the daylight saving adjusted by
daylight savings.
Click Save to save the changes
TV‐IP460PI
23
Advertisement
Table of Contents
