Table of Contents
Advertisement
TRENDnet User's Guide
Day/Night Switch
Day/Night Switch:
Choose whether you want the camera to be set to the
Day mode (color video) or Night mode (IR enhanced
black/white video). You can manually set it to Day
mode or Night mode, adjust by lighting (Auto), or
pre‐defined Scheduled‐Switch.
Auto:
Sensitivity: The light sensor sensitivity.
Scheduled‐Switch:
Use quick selection or enter the time down below.
Click OK to confirm the time you want to set.
Start Time: The start time for day mode.
End Time: The start time for day mode.
Channel 2, 3, and 4 have these additional options:
Smart IR: Click the dropdown and select ON or OFF.
IR Light Mode: Click the dropdown and select the option.
Brightness Limit: Drag the slider to adjust. Default: 10
© Copyright 2019 TRENDnet. All Rights Reserved.
Backlight Settings
BLC: If there's a bright backlight, the subject in front of the
backlight may appear silhouetted or dark. Enabling
BLC (back light compensation) function can correct
the exposure of the subject, but the backlight
environment will washed out to white. Click the
dropdown and select the position of the backlight or
select auto.
WDR: WDR (Wide Dynamic Range) assists in providing clear
images even under backlit environments by balancing
the brightness level of the image.
Wide Dynamic Level: The level of
compensation. Range: 0‐100%, default: 50%.
HLC: HLC (High Light Compensation) allows the camera to
identify and suppress strong light sources of which
often causes lens‐flares.
TV‐IP460PI
40
Advertisement
Table of Contents
