TRENDnet User's Guide
Expert Configuration
Expert Configuration
Draw Area/
Click this button to start/stop drawing directly on the
Stop Drawing:
image.
Clear All: Click this button to clear all the masking areas.
Scheduled Image
From the dropdown menu select OFF, Auto‐Switch
Settings:
and Scheduled‐Switch. If Scheduled Image Settings is
enabled, you may configure the rules for day/night
separately.
OFF: Disable the day and night switch.
Auto‐Switch: Automatically switch between the
configured rules for day and night time based on
illumination.
Scheduled‐Switch: Switch between the configured
rules for day and night time based on user configured
time.
Area: Select the area for the rule to be configured.
© Copyright 2019 TRENDnet. All Rights Reserved.
Arming Schedule
Sensitivity: Move the slider to adjust sensitivity. The greater the
value, the more sensitive. Default: 50
Percentage:
Move the slider to adjust the size proportion
(schedule on)
(expressed as a percentage of the total area) that the
moving object must exceed before triggering the
motion detection.
Click Save to save the changes
Arming Schedule
Delete/Delete All: Delete the selected segment/all segments on the
scheduler below.
Click Save to save the changes
TV‐IP460PI
47