Introduction; Preface; Product Description - KEB Combivert F5 Instruction Manual

Preface

1.

Introduction

1.1 Preface
We welcome you as a customer of the Karl E. Brinkmann GmbH and congratulate you to the aquisition of this
product. You have chosen a product on highest technical standard.
This manual as well as the specified hardware and software are developments of the Karl E. Brinkmann GmbH.
Errors and ommissions excepted! The Karl E. Brinkmann GmbH have prepared the documentation, hardware
and software to the best of their knowledge, however, no guarantee is given that the specifications will provide
the efficiency aimed at by the user. The Karl E. Brinkmann GmbH reserves the right to change the specifications
without prior notification or further obligation. All rights reserved. The safety and warning instructions specified in
this manual do not lay claim on completeness.
The pictograms used in this manual mean:
1.2

Product description

This instruction manual describes the frequency inverter series KEB COMBIVERT F5 for lift drives. This series
convinces through the special adaption of the operation to the requirements of lift drives. The lift functions are
available only in connection with the lift operator (part number 00.F5.060-200C software version 2.2).
The power range of KEB COMBIVERT F5 for lift drives ranges from
• 2.2...45 kW / 230 V class
• 2.2...630 kW / 400 V class
The designs are available in following variants:
• heat sink for control cabinet installation (standard)
• heat sink for control cabinet cutout (through-mount version)
• without heat sink for customer-specific cooling systems (Flat-Rear)
GB - 4
Danger
Warning
Caution
Attention
observe at
all costs
Information
Help
Tip