Dhcpv6 Relay Agent Configuration Commands; Display Ipv6 Dhcp Relay Server-Address - HP A5120 EI Series Command Reference Manual

After a static prefix is bound to a client, the configuration cannot be modified. You need to delete the
static prefix before you can bind the prefix to another client.
Examples
# Configure static prefix 2001:0410::/35 in address pool 1, and specify the DUID as
00030001CA0006A400, the IAID as A1A1A1A1, the preferred lifetime as one day, and the valid
lifetime as three days.
<Sysname> system-view
[Sysname] ipv6 dhcp pool 1
[Sysname-dhcp6-pool-1] static-bind prefix 2001:0410::/35 duid 00030001CA0006A400 iaid
A1A1A1A1 preferred-lifetime 86400 valid-lifetime 259200

DHCPv6 relay agent configuration commands

display ipv6 dhcp relay server-address

Syntax
display ipv6 dhcp relay server-address { all | interface interface-type interface-number } [ | { begin |
exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
all: Displays all DHCPv6 server address information.
interface interface-type interface-number: Displays DHCPv6 server address information of the specified
interface.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use the display ipv6 dhcp relay server-address command to display information about DHCPv6 server
addresses specified on the DHCPv6 relay agent.
Examples
# Display all the DHCPv6 server address information.
<Sysname> display ipv6 dhcp relay server-address all
Interface: Vlan2
Server address(es)
1::1
Output Interface
198