Sony PDW-V1 Operation Manual page 91

Message in time Display
data display
condition
Formatting! off
Disc Damage off
Non AV Full off
a) With respect to setting of basic menu item 016
During reception of commands from an external device connected to the REMOTE connector
Message in time Display
data display
condition
MAX# SB CLP off
CL OVER DUR off
Non AV Full off
No Disc! on
No Clip! limit
Disc Top! limit
Disc End! limit
a) With respect to setting of basic menu item 016
Alarms relating to sensors and drives
Message in time Display
data display
condition
HUMID! off
Description
a)
An attempt was made to display the
DISC MENU page in the system menu
during an auto format.
An attempt was made to record, display
an E-E picture, record an essence mark,
or add a quick scene selection sub clip
when there was no free sparing area.
An attempt was made to record, display
an E-E picture, record an essence mark,
or add a quick scene selection sub clip
when there was no free Non-Real-Time
space.
Description
a)
A command was received to add a sub
clip when the number of registered sub
clips had already reached the upper limit
(300) of the specifications of this unit.
A command was received to add a sub
clip when the total duration of sub clips in
the clip list had already reached the
upper limit (24 hours) of the
specifications of this unit.
A command was received to record,
display an E-E picture, record an
essence mark, or add a quick scene
selection sub clip when there was no free
Non-Real-Time space.
A recording, playback, search, or other
command was received with no disc
loaded.
A playback or search command was
received for a disc containing no
recorded clips.
A PREV or reverse high-speed search
command was received with the disc
stopped at the top.
A NEXT or forward high-speed search
command was received with the disc
stopped at the end.
Description
a)
Condensation was detected in the unit.
Action
Wait until the end of the auto format.
This disc cannot be recorded. Exchange
the disc.
Insert a different disc with enough free
capacity.
Action
These operations are not possible.
Insert a different disc with enough free
capacity.
Try the operation again after loading a
disc.
These operations are not possible.
Action
See 8-4 "Condensation" (page 93).
91
8-3 Alarms