Chapter 2 Names And Functions Of Parts; Configuration - Sony PDW-V1 Operation Manual

Names and Functions of

2-1 Configuration

Operation of the PDW-V1 uses the parts shown in the
following figure.
AC power inlet connector (left
side)
Connect to AC power with a power
cord (not supplied, see page 95).
Battery pack shoe (covered)
(see page 33)
Shoulder belt posts
(see page 95)
Disc slot and EJECT button
(see page 37)
Control panel (see page 20)
Parts
Chapter
AC power switch (rear panel)
Press
power off.
Security slot
You can fit a commercially available
security cable into this slot.
Press here to raise the cover.
a)For information about how to use
LCD panel (see page 24)
Connectors (see page 27)
2
"
to power on; press a to
a)
your security cable, refer to the
instructions provided with the
security cable.
2-1 Configuration
19