Maintenance Menu Operations - Sony PDW-V1 Operation Manual

7-4-2 Maintenance Menu Operations

This section describes the indications in the maintenance
menu and how to change the settings.
To display a menu item setting
To display the maintenance menu item settings, change the
switch setting within the unit, then carry out the following
operations.
For information about how to change the switch setting
within the unit, see page 76.
1
AUDIO MONITOR
L
CH-1 CH-2 CH-3 CH-4 CH-5 CH-6
R
ACCESS
SUB
CLIP THUMBNAIL MENU SET
NETWORK
LOCAL
REMOTE
CLIP SYSTEM S.SEL
ESSENCE
MENU MARK MENU
PREV PLAY NEXT STOP
IN
TOP F REV F FWD END
2,3
1
Press the MENU button.
The menu appears in the status display.
2
Hold down the COUNTER button, and press the SET
button.
In the status display, first "MAINTE MENU" appears
momentarily, and then the item group name appears.
To change the item group
Use the J/j buttons.
3
Press the k button.
The item name appears.
DATA DATA DATA DATA
VITC VIUB COUNTER VITC ALARM
dB OVER dB OVER dB OVER dB OVER
0 0 0 0
-12 -12 -12 -12
-20 -20 -20 -20
HOURS MINUTES SECONDS FRAMES
-30 -30 -30 -30 AUDIO 625 IMX 50 40 30 [ ]
-40 -40 -40 -40
525 DVCAM
48CH 16 24 BIT
-60 -60 -60 -60
CH- 15 CH- 26 CH- 37 CH- 48 BATT E F
2
SHUTTLE JOG
L
CH-7 CH-8
R
RESET SHIFT
MARK1
OUT
MARK2
3,4
Flashes to indicate that there is a next level (sub-item/setting).
To return to the item group
Press the K button.
To change the menu item
Use the J/j buttons.
4
Press the k button.
The setting value appears.
To return to the menu item
Press the K button.
When there is a sub-item
Repeat step 3.
To change the setting of a menu item
To change the setting of the currently displayed menu
item, carry out the following operations.
For details of changing settings of network-related items,
see the next item, "To change network settings."
AUDIO MONITOR
L
CH-1 CH-2 CH-3 CH-4 CH-5 CH-6
R
ACCESS
SUB
CLIP THUMBNAIL MENU SET
NETWORK
LOCAL
REMOTE
S.SEL
CLIP ESSENCE SYSTEM
MENU MENU
MARK
PREV PLAY NEXT STOP
IN
TOP F REV F FWD END
2 1
1
Using the J/j buttons, display the desired setting.
2
Press the SET button.
This saves the new setting, and the menu disappears
from the status display.
SHUTTLE JOG
L
CH-7 CH-8
R
RESET SHIFT
MARK1
OUT
MARK2
7-4 Maintenance Menu
81