Sony PDW-V1 Operation Manual page 73

Menu items in the 600s, relating to the time code reader, metadata, and UMID
Item number Item name
601 VITC POSITION SEL-1
602 VITC POSITION SEL-2
628 DF MODE
651 UMID SDI OUTPUT
652 UMID SDI VANC LINE
657 ESSENCE MARK SDI OUTPUT
660 ESSENCE MARK SDI VANC LINE
Item number Item name
703 BLANK LINE SELECT
Sub-item
0 ALL LINE
Settings
Select a line into which to insert VITC signals for DVCAM playback
a)
signals.
12H ... 16H ... 20H (in 525(U)/525(J)-line modes)
9H ... 19H ... 22H (in 625-line mode)
Note
You can insert the VITC signal in two places. To insert it in two places, set
both items 601 and 602.
a) In the DVCAM format, VITC is recorded as VAUX (Video Auxiliary) data.
Because VITC is inserted into video signals by the VITC generator only during
playback, the insertion line can be specified only for playback.
Select a line into which to insert VITC signals for DVCAM playback
a)
signals.
12H ... 18H ... 20H (in 525(U)/525(J)-line modes)
9H ... 21H ... 22H (in 625-line mode)
Note
You can insert the VITC signal in two places. To insert it in two places, set
both items 601 and 602.
a) In the DVCAM format, VITC is recorded as VAUX (Video Auxiliary) data.
Because VITC is inserted into video signals by the VITC generator only during
playback, the insertion line can be specified only for playback.
Select either drop-frame mode or non-drop frame mode for the counter
(when 525(U) or 525(J)-line mode is selected).
on (df): Drop-frame mode
off (ndf): Non-drop frame mode
Select whether to output UMID in the VANC of the SDI output.
off: Do not output.
on: Output.
See 7-3-3 "Using UMID Data" (page 77) for more information about
UMID.
Select the line in which UMID is output when menu item 651 is set to "on."
12H, 13H, 15H, 16H, 17H, 18H, 19H (525(U)/525(J)-line modes)
9H, 10H, 12H, 13H, 14H, 15H, 16H, 17H, 18H (625-line mode)
See 7-3-3 "Using UMID Data" (page 77) for more information about
UMID.
Select whether to output essence marks in the SDI output VANC.
off: Do not output.
on: Output.
When item 657 is set to "on," select the line to which to output essence
marks.
12H, 13H, 15H, 16H, 17H, 18H, 19H (525(U)/525(J)-line modes)
9H, 10H, 12H, 13H, 14H, 15H, 16H, 17H, 18H (625-line mode)
Menu items in the 700s, relating to video control
Settings
Switch blanking of the video output signal on or off for individual lines in the
vertical blanking interval.
The Y/C signal and odd/even fields are blanked simultaneously.
- - -: Specify the blanking for each line separately.
blnk: Regardless of the setting of other sub-items, blank all lines which
can be specified in this menu item.
thru: Regardless of the setting of other sub-items, switch off blanking for
all lines which can be specified in this menu item.
73
7-3 Extended Menu