Final Checks - Stiga VILLA 2000 Workshop Manual

Edition Manual
2008-05-19 Workshop Manual, Stiga Villa/Ready 1 General

1.4.4 Final checks

Removing from pallet
All the above measures shall have been done
with the machine standing on the pallet. Now,
loosen ev. remaining attachments and roll off
the machine from the pallet.
Accessories
Fit and adjust accessories.
Test driving
Warning!
Do not drive without a work
equipment (mover deck) attached.
Risk for turning over.
Drive the machine for a few minutes. Test all
the functions. Pay special attention to the
safety functions. If the machine is to be
delivered with mower deck or other
accessories, fit these before test driving the
machine.
HST oil
Check the oil level in the HST's expansion tank
after test driving, and top up if necessary.
Chapter
Steering chain / Steering wire
Check that the steering chain / steering
wire is sufficiently taut. Adjust if
necessary.
Miscellaneous
Give the machine a general inspection.
• Is the machine clean?
• Is there any oil leakage?
• Abnormal noise or rattle?
Receipt
By filling in the guarantee certificate you
guarantee that the delivery service has
been correctly conducted.
Remember to make sure that the
customer receives all the documentation
when the machine is collected / delivered.
Page
9