Stiga VILLA 2000 Workshop Manual page 18

Edition Manual
2008-05-19 Workshop Manual, Stiga Villa/Ready 2 Chassis and Body
Contents in this chapter
2.1 Lifting mechanism,
manual ..........................................2
2.1.1 General.....................................2
2.1.2 Description................................2
2.1.3 Dismantling...............................2
2.1.4 Repair of lifting lock ..................6
2.1.5 Assembly ..................................6
General
To facilitate the driving, handling of work equipment and to make it comfortable for the
driver, the machines are equipped with a various number of aid equipments. These
equipments are mainly the same for all the machines covered by this manual, but in some
cases configurated in different ways. Where divergences occour between the machines,
particular instructions are given for each particular equipment.
This chapter gives a brief description of the equipments and describes their repair and
replacements.
2 Chassis and body
2.2 Lubrication chassis .................... 8
2.2.1 Steering pivot pins
2.2.2 Control wires ............................ 8
2.2.3 Tensioning arms ...................... 9
2.2.4 Steering chain .......................... 9
2.2.5 Bearings................................... 9
Chapter
and beam pivot........................ 8
Page
1