Stiga VILLA 2000 Workshop Manual page 46

Edition Manual
2008-05-19 Workshop Manual, Stiga Villa/Ready 6 Control wires
Contents in this chapter
6.1 Description.................................2
6.2 Cable holders .............................2
6.3 PTO wire .....................................3
6.3.1 Dismantling.............................3
6.3.2 Checks ...................................3
6.3.3 Assembly................................3
6.3.4 Adjustment .............................3
General
All the manoeuvring functions are collected around the operator.
All mechanical control movements from the operator to the respective device on the ma-
chine are conducted by wires or rods.
This chapter gives a brief description about the wires and information about how to re-
place and adjust the wires.
This chapter is valid for the actual machines where the actual system occur.
Chapter
6 Control Wires
6.4 Throttle wire .............................. 4
6.4.1 Dismantling ............................ 4
6.4.2 Assembly ............................... 4
6.4.3 Adjustment............................. 4
Page
1