Repair Of Lifting Lock; Assembly - Stiga VILLA 2000 Workshop Manual

Edition Manual
2008-05-19 Workshop Manual, Stiga Villa/Ready 2 Chassis and Body

2.1.3 Repair of lifting lock

The lifting lock can be purchased as a complete
spare part.
The parts can be lubricated with a thin
lubricant, e.g. silicon spray, 5-56, WD40, or the
like, if the lock jams.
Note!
Viscous lubricant such as consistent
grease must not be used.

2.1.4 Assembly

Assemble in reverse order.
Check that the accessory lifter functions as
intended by repeatedly lifting and lowering it.
Note!
Pay attention to the following notes
during the assembly:
A. Apply a thin layer of universal grease to the
plastic bushings at the lifter arm.
B. It does not matter how the lifting lock
is fitted since it is symmetrical.
Chapter
UNIVERSAL GREASE
Page
6