Machine Specifications; Technical Data; Noise Emission; Dust Emission - Jet JWBS-10 Operating Instructions Manual

The moving saw blade in the work area can cause injury.
Broken saw blades can cause injuries.
Thrown workpieces can lead to injury
Wood chips and sawdust can be health hazards. Be sure to
wear personal protection gear such as safety goggles ear-
and dust protection.
Use a suitable dust exhaust system.
The use of incorrect mains supply or a damaged power
cord can lead to injuries caused by electricity.

4. Machine specifications

4.1 Technical data

Wheel diameter
Cutting width
Cutting height
Sawblade length
Blade width
Blade thickness
Cutting speed
Machine Table(Lx W)
Table tilting range
Working height with stand
Dust port diameter
Overall without stand
(WxDxH)
Weight without stand
Overall with stand
(WxDxH)
Weight with stand
Mains
Motor Input power
Reference current
Extension cord (H07RN-F):
Installation fuse protection

4.2 Noise emission

Determined according to EN 1807
(Inspection tolerance 3 dB)
Workpiece beech:
T=30mm, L=1500mm, moisture 8,5%
Acoustic power level
(according to EN ISO 3746):
Idling
Operating
Acoustic pressure level
(EN ISO 11202):
Idling
Operating
The specified values are emission levels and are not
necessarily to be seen as safe operating levels. Although
there is a correlation between emission and imission levels,
these do not constitute a basis for determining the
necessity of additional safety measures. Workplace
conditions which could influence the noise imission level
include the duration of resonance, spatial particulars, other
noise sources etc. For example, the number of machines
and other work being performed. The permissible workplace
levels can vary from country to country.
This information is intended to allow the user to make a
better estimation of the hazards and risks involved.
255 mm
max 245 mm
max 100 mm
1712 mm
3 – 12.7 mm
0,3 – 0,6 mm
870 m/min
335x340 mm
0° to 45°
1055mm
100mm
686 x 457 x838mm
34 kg
762 x496 x1511mm
40 kg
1~230V, 50Hz
600W S1
2,7 A
3x1,5mm²
10 A
LwA 85,0 dB(A)
LwA 96,4 dB(A)
LpA 72,6 dB(A)
LpA 83,4 dB(A)

4.3 Dust emission

The band saw JWBS-10 has been dust emission inspected.
At an air velocity of 20 m/s on the dust port dia 100mm:
Vacuum pressure
Volume flow
The machine meets a workplace dust emission limit of 2
mg/m³.
4.4 Content of delivery
Open stand
Machine table
Fence
Fence support rails
Mitre gauge
Assembly bag
Saw blade 10 mm
Operating manual
Spare parts list

4.5 Machine description

A....................Sawblade tension knob
B.....................Upper viewing window
C.....................Control wheel Upper blade guide
D.....................Machine lamp
E.....................Upper blade guard
F..................... Rip fence
G.....................Sawblade
H.....................Mitre gauge
I......................Blade tension lever
J.....................Saw table
K.....................Tracking knob
L......................Wheel locking blade guide
M.....................Switch
N......................Motor assembly
O......................Extension table
P......................Dust extraction nozzle
Q......................Knob for the table
S.......................Knob for Saw Door
1250 Pa
565 m³/h
Fig. 1