4. Machine specifications
4.1 Machine description
A Blade tension handwheel
B Height adjust hand wheel
C Height scale
D Upper blade guides
E Saw blade
F Table pin
G Dust port
H Wheel cover
I
Mitre gauge
J Fence carrier rail
K Fence
L On/Off magnetic switch
M Parallel cutting device
N Wheel cover
P Wheel cover micro switch
4.2 Technical data
Fig 1
Wheel diameter
Cutting width
Cutting height
Sawblade length
Blade width
Blade thickness
Cutting speed
Machine Table(Lx W)
Table tilting range
Working height
Dust port diameter
Overall (LxWxH)
Weight
Mains
Output power
Reference current
Extension cord (H07RN-F):
Installation fuse protection
4.3 Noise emission
Determined according to EN 1807
(Inspection tolerance 4 dB)
Workpiece beech:
T=30mm, L=1500mm, moisture 8,5%
Acoustic power level
(according to EN ISO 3746):
Idling
Operating
Acoustic pressure level
(EN ISO 11202):
Idling
Operating
The specified values are emission levels and are not
necessarily to be seen as safe operating levels. Although
there is a correlation between emission and imission levels,
these do not constitute a basis for determining the necessity
of additional safety measures. Workplace conditions which
could influence the noise imission level include the duration of
resonance, spatial particulars, other noise sources etc. For
example, the number of machines and other work being
performed. The permissible workplace levels can vary from
country to country.
This information is intended to allow the user to make a better
estimation of the hazards and risks involved.
4.4 Dust emission
The band saw JWBS-14Q has been dust emission inspected.
At an air velocity of 20 m/s on the dust port dia 100mm:
Vacuum pressure
Volume flow
The machine meets a workplace dust emission limit of 2
mg/m³.
4.5 Content of delivery
355 mm
max 350 mm
max 200 mm
2560 mm
3 - 16 mm
0,4 – 0,7 mm
800 m/min
385x500 mm
-10° to 45°
1055mm
100mm
830x785x1750mm
93 kg
230V ~1/N/PE 50Hz
0,5 kW (0,75HP)S1
3,5 A
3x1,5mm²
10 A
LwA 82 dB(A)
LwA 93 dB(A)
LpA 74 dB(A)
LpA 87 dB(A)
1250 Pa
565 m³/h