Screen Display Content - Mitsubishi Electric GOT SIMPLE GS2110-WTBD User Manual

11.4.3

Screen display content

(1) Connection status of the communication ports
Indicates the connection status of Standard I/F-1 and I/F-2.
Listed in the table below are display items and the connection status (channel number).
Display item
PLC
Barcode
TRANS.
Host(PC)
Printer
(2) Communication status
Displays the communication status of each communication port.
The SD and RD symbols appear in white on red (
gray ( ,
The SD and RD symbols on the screen indicate normal communication or cable disconnection.
Setting example
Port
I/F-1
I/F-2
(a) [During normal communication (with connection to a device that supports the transparent mode)]
(b) [When the connecting cable with the controller is disconnected]
Only the SD symbol next to I/F-1 blinks.
11 - 16
11.4 Communication Monitor
(1) (3)
Channel number
Ch1 "PLC" appears when connected to a controller (PLC or microcomputer)
Ch8 "BCR" appears when connected to a bar code reader
"TRANS." appears when the controller that is allocated to one of the
communication ports supports the transparent mode
Ch9
"TRANS." automatically changes to "PC" when communicating with drawing
software
"PC" appears when the controller that is allocated to one of the communication
Ch9
ports does not support the transparent mode
ChA Appears when connected to a printer.
) at other times. They may appear lit depending on the communication status.
Channel number
Ch1 MELSEC-FX
,
-
Ch8 Ch9
The SD and RD symbols for I/F-1
, ) while data are being sent or received, and in black on
Controller type
(2)
Remark