Sd Card; Applicable Sd Card; Installation/Removal Procedure Of Sd Card - Mitsubishi Electric GOT SIMPLE GS2110-WTBD User Manual

8. OPTION
8.1

SD Card

The SD card is used to transfer the OS or project data and to save the data of the alarm history function.
For details, refer to the following.
➠ 15. CONTROL OF VARIOUS DATA (DATA CONTROL)
8.1.1

Applicable SD card

The following SD cards are applicable for GOT.
Model
L1MEM-2GBSD
L1MEM-4GBSD
NZ1MEM-2GBSD
NZ1MEM-4GBSD
NZ1MEM-8GBSD
NZ1MEM-16GBSD
-
*1 Some models with the operations checked by our company are usable. For the operation-checked models, refer to "Operation
Check Results of Third Party SD Cards on GT14 Model" (Hime-T-P-0089) separately available, or contact your local distributor.
8.1.2

Installation/removal procedure of SD card

Install/remove the SD card when the power supply of the GOT is OFF or [Access inhibit] is set in the [SD card access]
setting of the GOT.
■1. Installation
SD memory card 2GB
SDHC memory card 4GB
SDHC memory card 2GB
SDHC memory card 4GB
SDHC memory card 8GB
SDHC memory card 16GB
Commercially-available SD card
SD card
surface
Specifications
*1
Step 1.
Touch [Main Menu]
access] [Permissions] to set [Access
inhibit].
➠
15.4 SD Card Access
Check that the SD card access LED turns
off.
When the SD card access LED is off, the
SD card can be installed or removed even
when the GOT is on.
Step 2.
Insert a SD card into the SD card interface
with its front side (nameplate side) outside.
Step 3.
Touch [SD card access]
to set [Permissions].
Check that the SD card access LED turns
on.
8.1 SD Card
8
[Data] [SD card
[Access inhibit]
8 - 1