Operation Procedures - Mitsubishi Electric GOT SIMPLE GS2110-WTBD User Manual

16.2.6

Operation procedures

This section describes the contents of the MELSEC-FX list editor and the key functions displayed on the screen.
■1. Key arrangement and a list of key functions
The arrangement and functions of the keys displayed on the MELSEC-FX List Editor window are described below.
■2. Displayed contents
1)
3)
No. Item
1) Channel No
2) Mode
3) Error message
4) List display area
5) Key area
16 - 20
16.2 FX List Editor
4)
Displays the currently selected channel number.
Touching "ChNo." displays the communication setting window.
The communication setting window is not displayed if the MELSEC-FX list editor is started
from the FX ladder monitor.
Displays a mode for MELSEC-FX list editor.
➠
16.2.7 Selection and operation of modes
[Monitor] is displayed when the list monitor is executed.
➠
16.2.17 List monitor
Displays the contents of errors that occur with the MELSEC-FX list editor.
➠
16.2.19 Error messages and corrective actions
Displays the sequence program in list format (12 digits).
The position (line) that can be edited is displayed with a bar.
Displays the keys that can be used with the MELSEC-FX list editor.
2)
5)
Display contents