Panel Cutting Dimensions; Mounting Position - Mitsubishi Electric GOT SIMPLE GS2110-WTBD User Manual

6.2

Panel Cutting Dimensions

Cut holes in the following dimensions on the panel.
Ensure 10mm of space in upper and lower parts of the panel for mounting fixtures.
• Horizontal format (If the vertical format is selected, the dimension must be rotated 90 degrees.)
6.3

Mounting Position

When mounting the GOT, the following clearances must be maintained from other structures and devices.
• Horizontal format (If the vertical format is selected, the dimension, which is rotated 90 degrees clockwise looking from the
display section side, is required.)
Installation Environment
In the presence of radiated-noise or heat-generating equipment nearby
In the absence of radiated-noise or heat-generating equipment nearby
*1
*2
C
6 - 2
6.2 Panel Cutting Dimensions
+2
A
-0
Vertical Format....50mm (1.97") or more
Vertical Format....80mm (3.14") or more
10 (0.4") or more
Panel thickness: 1.6 to 4mm
(0.06" to 0.15")
Item
GS2110-WTBD
GS2107-WTBD 191 (7.52")
10 (0.4") or more
Unit: mm (inch)
A, D [mm] (inch) B [mm] (inch) C [mm] (inch)
80mm (3.14")
50mm (1.97")
or more
20mm (0.79") or 20mm (0.79")
more
D
A
B
258 (10.16") 200 (7.88")
137 (5.4")
50mm (1.97")
*1 *2
or more or more
20mm (0.79")
or more or more
E
Panel thickness: 1.6 to 4mm
E [mm] (inch)
100mm (3.94")
or more
20mm (0.79")
or more