16.2.14 PLC diagnostics
Displays the FX PLC error message, error code, and step at which the error occurred.
■1. Operation
[PLC diagnostics]
OP
■2. PLC diagnostics screen
The following describes the contents displayed on the PLC diagnostics screen and the function of on-screen key.
(1) Displayed contents
No.
Item
1)
Error message
2)
Detail
3)
Step
GO
OP
Select [PLC diagnostics] with
GO
1)
2)
Displays the error message. (I/O configuration error/PLC hardware error/PC/HPP communication error/
Serial communication error/Parameter error/Syntax error/Circuit error/Operation error)
Displays the error code.
Displays the step number in the sequence program at which the error occurred.
(This is displayed only for a syntax error, circuit error, or operation error.)
POINT
POINT
POINT
Error details
For details of the FX PLC errors, refer to the following.
➠
Programming manual for the FXCPU used
or
3)
Display contents
16.2 FX List Editor
16
16 - 33