12.2 Operation Setting (Settings for Operation)
12.2.1
Operation setting functions
Setting regarding GOT operation can be set.
The items which can be set are described below. If touch the each item part, the respective setting becomes possible.
Function
Buzzer volume
Buzzer volume setting can be changed.
Window move buzzer
Whether turn ON/OFF buzzer when move window can be selected.
The touch panel sensitivity when touching the GOT screen can be set.
Key reaction
(For preventing chattering)
Calibrates the touch panel sensitivity
Calibration
➠
Utility call key setting screen can be displayed
Utility call
➠
*1
The more the value set for [Key reaction] is high, the more the key reaction speed slows.
For example, when the GOT recognizes touching the GOT screen once as touching the screen twice, set a higher value for [Key
reaction].
Description
12.2.4 Position correction of the touch panel (touch panel calibration
setting)
12.2.5 Setting the utility call keys
"Key reaction" [ms]
Standard (
POINT
POINT
POINT
Operation setting by GT Designer3
Set buzzer volume and window move buzzer volume by selecting [Common]
Environmental Setting]
[GOT Setup] of GT Designer3.
When change a part of the setting, change the setting by the GOT display setting after
downloading the project data.
➠
GT Designer3 (GOT2000) Help
0)
+10
+20
±
12.2 Operation Setting (Settings for Operation)
Setting range
OFF/SHORT/LONG
(At factory shipment: SHORT)
ON/OFF
(At factory shipment: ON)
*1
±0 to +120
-
-
+40
+80
+120
[GOT
12 - 5
12