15.8.7
Operation of backup
This section describes the backup operation screen.
The screen operation procedure varies depending on the PLC CPU type and password status. For the details of the
operation procedure, refer to the following.
➠
15 - 56
15.8 BACKUP/RESTORE
15.8.5 Security and password
Step 1.
Touch [Backup].
Step 2.
Touch [Execute].
Touching any switch (among [CPU
No. 1], [CPU No. 2], [CPU No. 3] and
[CPU No. 4]) is invalid.
Step 3.
When the left screen appears, touch
[YES].
Step 4.
When the left screen appears, touch
[OK], and input the password on the
key window.
(Continued to next page)