P0015 Macros - Siemens SINAMICS G110M Operating Instructions Manual

Select Technology Applica-
tion
Input the Minimum Frequen-
cy
Input Ramp-down time
Settings saved
5.3.4

p0015 Macros

Macros for the CU240M
The macros that are available for the CU240M Control Modules are shown in the figures
below. Macro 7 is the default setting for the CU240M DP and CU240M PN Control Modules,
Macro 21 is the default settings for the CU240M USS Control Module and Macro 30 is the
default settings for the CU240M ASi Control Modules.
Distributed converter for SIMOGEAR geared motors
Operating Instructions, 06/2016, FW V4.7.6, A5E31298649B AG
Select required Motor Data
ID function
Input Maximum Frequency
Summary of Settings - Select
Continue
Status Screen displayed
Commissioning
5.3 Basic commissioning
Select Macro Source
Input Ramp-up time
Save Settings
On first ON command - Motor
ID is performed
111