Table of Contents
Advertisement
When the trigger switch is pressed and released:
Indicator LED
Blue, flashing rapidly
Blue, flashing slowly
®
When the Bluetooth
wireless link is established or broken:
Indicator LED
Green for 0.5 seconds
Red for 0.5 seconds
3.6 Scanning When the Bluetooth
The scanner can scan codes even with the Bluetooth
required but data transfer is not.
This function can be switched only with the Bar-coded parameter menu.
®
"Scan w/ Bluetooth
link broken"
Cancel "Scan w/ Bluetooth
broken" Bar Code symbol
Note:
The "Scan w/ Bluetooth
and "Start operation" Bar Code symbols in this order with "Scan w/ Bluetooth
the setting, the Cancel "Scan w/ Bluetooth
procedure in Section 11.1 must be scanned.
Beeper
Silent
Beeper
Two short beeps
Long beep
®
Wireless Link is Broken
Allows the scanner to scan codes with the Bluetooth
also disables the Bluetooth
computer impossible.
®
link
Cancels the "Scan w/ Bluetooth
Allows the scanner to scan codes with the Bluetooth
It also enables the Bluetooth
computer possible.
®
link broken" parameter setting is retained even the scanner scans the "End operation"
The scanner, as a master, is searching for a connection target.
The scanner, as a slave, is waiting for the master to connect.
The Bluetooth
®
wireless link is successfully connected.
®
The Bluetooth
wireless link no longer exists.
®
wireless link broken. Use this scanning way when scanning codes is
®
interface, making data transfer with the host
®
link broken" setting.
®
interface, making data transfer with the host
®
link broken" Bar Code symbol given in Section 11.2 and its
13
Scanner Status
Scanner Status
®
wireless link broken. It
®
wireless link established.
®
link broken" enabled. To cancel
Advertisement
Table of Contents
