Table of Contents
Advertisement
Chapter 2 Basic Operations
2.1 Loading the Batteries
Batteries are not included in the package. Have batteries compliant with the IEC 60086-2 standard on hand, such as LR6 (AA)
alkaline batteries or LR6 (AA) rechargable nickel-metal hydride batteries.
Before replacing the batteries, first turn the scanner off.
Be sure to set the type of battery.
Load the batteries correctly by the following procedure.
(1) Unlock the battery cover lock (1) and remove the battery
cover (2).
(2) Make sure that the new batteries are in the correct
orientation when inserting them. Insert the new batteries
in the direction indicated by the arrow.
The scanner will not function if the batteries are
inserted incorrectly.
When removing batteries, remove them from the
plus (+) end.
(3) Insert the battery cover tab (1), and then close the
battery cover (2). The battery cover is now locked in
position.
(4) Set the type of battery.
The type of battery needs to be set only if it is going
to be changed. When the scanner leaves the factory,
the default setting is "LR6 (AA) alkaline batteries".
2
Advertisement
Table of Contents
