Denso SE1-BB User Manual page 56

Items
Reading EAN-8
EAN-8 transmission of check digit
EAN-8 Conversion to the EAN-13
format
Reading UPC/EAN with 2-digit
add-on
Reading UPC/EAN with 5-digit
add-on
Reading UPC/EAN with add-on only
Add-on check level
Interleaved 2 of 5
Items
Reading Interleaved 2 of 5
Interleaved 2 of 5 transmission of
check digit
Minimum number of readable digits
for Interleaved 2 of 5
Maximum number of readable digits
for Interleaved 2 of 5
(Note 1) The parameter setting ranges are different from the numbers of digits that the scanner can actually read.
Standard 2 of 5
Items
Reading Standard 2 of 5
Standard 2 of 5 transmission of
check digit
Minimum number of readable digits
for Standard 2 of 5
Maximum number of readable digits
for Standard 2 of 5
(Note 1) The parameter setting ranges are different from the numbers of digits that the scanner can actually read.
Parameters
Enable
Disable
Enable
Disable
Enable
Disable
Enable
Disable
Enable
Disable
Enable
Disable
Disable
Levels 1 to 3
Parameters
Enable, without the check digit
Enable, with the check digit
Disable
Enable
Disable
4 to 99 digits
Parameters
Enable, without the check digit
Enable, with the check digit
Disable
Enable
Disable
3 to 99 digits
43
Defaults
*
*
*
*
*
*
*
Defaults
*
*
4 digits
99 digits
Defaults
*
*
3 digits
99 digits
: Can be changed only with the configuration software.
Refer to:
Section 11.2
Section 9.4 (4)
Section 9.4 (4)
Refer to:
Section 11.2
(See Note 1.)
Refer to:
Section 11.2
(See Note 1.)