Denso SE1-BB User Manual page 57

Codabar (NW-7)
Items
Reading Codabar (NW-7)
Codabar (NW-7) transmission of
check digit
Minimum number of readable digits
for Codabar (NW-7)
Maximum number of readable digits
for Codabar (NW-7)
Transmission of Start/Stop codes for
Codabar (NW-7)
Check digit method for Codabar
(NW-7)
(Note 1) The parameter setting ranges are different from the numbers of digits that the scanner can actually read.
Code 39
Items
Reading Code 39
Code 39 transmission of check digit
Minimum number of readable digits
for Code 39
Maximum number of readable digits
for Code 39
Transmission of Start/Stop codes
for Code 39
Conversion to FULL ASCII
Conversion from Code 39 to Code
32
Transmission of the leading "A" of
Code 32
C/D confirmation of Code 32
(Note 1) The parameter setting ranges are different from the numbers of digits that the scanner can actually read.
Parameters
Enable, without the check digit
Enable, with the check digit
Disable
Enable
Disable
3 to 99 digits
(including start/stop codes)
Transmit a/b/c/d
Transmit A/B/C/D
Disable
MOD-16
7-check method
Parameters
Enable, without the check digit
Enable, with the check digit
Disable
Enable
Disable
1 to 99 digits
(including start/stop codes)
Enable
Disable
Enable
Disable
Enable
Disable
Enable
Disable
Yes
No
44
Defaults
*
*
4 digits
99 digits
*
*
Defaults
*
*
1 digit
99 digits
*
*
*
*
*
: Can be changed only with the configuration software.
Refer to:
Section 11.2
(See Note 1.)
Section 11.2
Section 11.2
Refer to:
Section 11.2
(See Note 1.)
Section 11.2
Section 11.2