Denso SE1-BB User Manual page 59

Plessey
Items
Reading Plessey
Mode of reading Plessey
Minimum number of readable digits
for Plessey
Maximum number of readable digits
for Plessey
(Note 1) The parameter setting ranges are different from the numbers of digits that the scanner can actually read.
GS1 Databar (RSS)
Items
Reading GS1 DataBar Omnidirectional
& GS1 DataBar Truncated (Note 1)
Reading GS1 DataBar Stacked & GS1
DataBar Stacked Omnidirectional (Note 2)
Reading GS1 DataBar Limited
(Note 1)
Reading GS1 DataBar Expanded
(Note 1)
Reading GS1 DataBar Expanded
Stacked (Note 2)
FNC1 transmission of GS1 DataBar
Expanded
Minimum number of readable digits for
GS1 DataBar Expanded & GS1 DataBar
Expanded Stacked (Note 1) (Note 2)
Maximum number of readable digits for
GS1 DataBar Expanded & GS1 DataBar
Expanded Stacked (Note 1) (Note 2)
(Note 1) These show GS1 DataBar Omnidirectional (RSS-14), GS1 DataBar Truncated (RSS-14 Truncated),
GS1 DataBar Limited (RSS Limited), and GS1 DataBar Expanded (RSS Expanded).
(Note 2) These show GS1 DataBar Stacked (RSS-14 Stacked), GS1 DataBar Stacked Omnidirectional (RSS-14 Stacked Omnidirectional),
and GS1 DataBar Expanded Stacked (RSS Expanded Stacked).
(Note 3) The setting ranges are different from the numbers of digits that the scanner can actually read.
(11) Trigger switch control
Items
Trigger switch control mode
®
Break Bluetooth wireless link
Parameters
Enable
Disable
Single
Dual
4 to 99 digits
(incl. 2-digits C/D)
Parameters
Enable
Disable
Enable
Disable
Enable
Disable
Enable
Disable
Enable
Disable
Convert to GS before Transmission
Disable
1 to 99 digits
Parameters
Auto-off mode
Momentary switching mode
Alternate switching mode
Enable
Disable
46
Defaults
*
*
4 digits
99 digits
Defaults
*
*
*
*
*
*
1 digit
99 digits
Defaults
*
*
: Can be changed only with the configuration software.
Refer to:
Section 11.2
Section 11.2
(See Note 1.)
Refer to:
Section 11.2
(See Note 3.)
Refer to:
Section 5.1
Section 3.3