Denso SE1-BB User Manual page 58

Code 128, GS1-128 (EAN-128)
Items
Reading Code 128
Reading GS1-128 (EAN-128)
Minimum number of readable digits
for Code 128
Maximum number of readable digits
for Code 128
Minimum number of readable digits
for GS1-128 (EAN-128)
Maximum number of readable digits
for GS1-128 (EAN-128)
Transmission of FNC1 for Code 128
Transmission of FNC1 for GS1-128
(EAN-128)
(Note 1) The setting ranges are different from the numbers of digits that the scanner can actually read.
(Note 2) Using the Bar-coded parameter menu enables or disables reading of both Code 128 and GS1-128 (EAN-128) at the same time.
Code 93
Items
Reading Code 93
Minimum number of readable digits
for Code 93
Maximum number of readable digits
for Code 93
(Note 1) The parameter setting ranges are different from the numbers of digits that the scanner can actually read.
MSI
Items
Reading MSI
C/D transmission of MSI
Minimum number of readable digits
for MSI
Maximum number of readable digits
for MSI
(Note 1) The parameter setting ranges are different from the numbers of digits that the scanner can actually read.
Parameters
Enable
Disable
Enable
Disable
1 to 99 digits
(excluding start/stop codes and
1-digit check digit)
1 to 99 digits
(excluding start/stop codes and
1-digit check digit)
Disable
Transmit GS
Disable
Transmit GS
Parameters
Enable
Disable
1 to 99 digits
(excluding start/stop codes and
2-digit check digit)
Parameters
Enable without C/D
Enable with C/D (1 digit)
Enable with C/D (2 digits)
Disable
Enable
Disable
3 to 99 digits
(incl. C/D)
45
Defaults Refer to:
*
Section 11.2
(See Note 2.)
*
1 digit
(See Note 1.)
99 digits
1 digit
(See Note 1.)
99 digits
*
Section 11.2
*
Defaults Refer to:
Section 11.2
*
1 digit
(See Note 1.)
99 digits
Defaults Refer to:
Section 11.2
*
*
Section 11.2
3 digits
(See Note 1.)
99 digits