Installing Ace Software; Description Of Connectors On Robot Interface Panel - Omron Quattro 650H User Manual

5.5 Installing ACE Software

You install ACE from the ACE software media. ACE needs Microsoft .NET Framework. The
ACE Setup Wizard scans your PC for .NET, and installs it automatically if it is not already
installed.
1. Insert the ACE software media into your PC. If autoplay is enabled, the menu is dis-
played. If autoplay is disabled, you will need to manually access the media content.
NOTE: The online document that describes the installation process opens in the
background when you select one of software installation steps below.
2. Especially if you are upgrading your ACE software installation: from the ACE software
menu, click Read Important Information.
3. From the software menu, click Install the ACE Software.
4. The ACE Setup wizard opens. Follow the instructions as you step through the install-
ation process.
5. When the install is complete, click Finish.
6. After closing the ACE Setup wizard, click Exit on the menu and proceed to the Start-up
Procedure.
NOTE: You will have to restart the PC after installing ACE.

5.6 Description of Connectors on Robot Interface Panel

A
B
D
E
09955-000 Rev. N
C
Figure 5-8. Robot Interface Panel
Quattro User's Guide
Chapter 5: System Installation
G
F
J
H
81