Safety Information And Warnings; Intended Use; Appropriate Hardware Persons - Sony Multiscan CPD-1304S Service Manual

2

2 Safety information and warnings

The safety notes and warnings in this operating instructions (and on the measurement device in
English) support the proper handling of the device and how to avoid injury and damage. The
device meets the relevant safety standards. If used appropriately it poses no dangers that could
threaten the health of personnel or cause damage to property
The safety information and warnings must be read and adhered to for the
safe and proper operation in any case!
The necessary language skills are assumed.
Avoidable damage to the equipment resulting, for example, from
insufficient knowledge of the operating instructions, shall lead to the loss
of any liability claims against Elster GmbH.
Missing warning symbol does not exempt individuals from personal
responsibility for security.
If it is determined that the device or parts of the device, such as safety valves or inlet
tubes, are damaged or no longer operate safely, the measuring device has to be taken
out of operation, disconnected from the gas and electricity supply and secured from

2.1 Intended use

The GasLab Q2 is designed and constructed exclusively for its
natural gas or natural like gas as described later in this document (see chapter 3 and following).
Intended use includes compliance with all specifications in this operating instructions or on the
device. Any use beyond the intended use or any other use of Q2 is considered misuse. Any claims
for damages due to misuse are excluded.
The device is to be used only for its intended purpose as described in this
operating instructions. If you use the device for other tasks or purposes,
the protection may be impaired. This can lead to dangerous situations.

2.2 Appropriate hardware persons

Mounting, electrical installation, commissioning, inspection and
maintenance work (opening the housing) should only be carried out by
specialists.
The appropriate specialists have expertise according to EN-IEC 60079-14 Annex A or have
comparable expertise. They have the ability to recognize hazards and risks, to assess their own
work and avoid potential hazards.
Page 10 of 135
being put into operation inadvertently.
G a s Q u a l i t y A n a l y z e r
Safety information and warnings
.
use. This is to analyze
intended
GasLab Q2