Display Archive And Display Modbus - Sony Multiscan CPD-1304S Service Manual

7

7.2.8 Display Archive and Display Modbus

Behind this icon is the Archive Main display.
The figures and the following notes are only examples, the actual setup is done
with the software enSuite. (See chapter 8)
Behind this icon is the Modbus Main display The figures and the following notes
are only examples. The actual setup is done with the software enSuite. (See
Additional information on data logging and modbus registers, see chapter 8.
Documents of the enCore FlowComputers (see www.docuthek.com) contain
also additional information on this general data management.
Page 70 of 135
GasLab Q2 displays and operating the device
In the first two lines, you can use the two
drop-down lists to select archive-Group
and archive-Channel. After selecting and
clicking on Show values the selected
archive values are displayed.
The following functions are available in this
display:
Channel
group)
Delete content
Time stamp
Ordinal no.
Value
Figure 7.36:
Display Archive Main display and Values
chapter 8)
The main display contains all the registers in
ascending order. Each register number is a
link to the detail display in the other
properties. After selecting and clicking on a
link, the display appears
Modbus register with:
Area name
Register name
Register no:
Register content
Data obj. content
Last refresh:
Figure 7.37: Display Modbus Main display and
Modbus register
G a s Q u a l i t y A n a l y z e r
(switch to another channel of the
(clear archive if rights given)
(Date of archive entry)
(automatically indent. number)
(archived result)
GasLab Q2