Description Of Operation Procedure; Database Switch; Sd Card Copy; Usb Output - Panasonic CZ-256ESMC3 Technical Data Manual

Various procedures
● Description of operation procedure
After inserting the media correctly in SD device 1 and SD device 2, follow the procedure described below, and
execute by pressing the 1 "Database switch" or 2 "Copy SD card" button.
After pressing the button, execute the process according to the screen message.

1 Database switch

Change the settings so that SD device 1 (with SD card inserted) is the master database, and SD device 2 is
in replication database mode.
SD insertion (○: insert)
SD device 1 SD device 2
○
○
×
* Regardless of the SD card type (SLC/MLC), the database mode will be set according to the devices where they
are inserted.

2 SD card copy

The contents of the SD card inserted in SD device 1 will be completely copied to the SD card inserted in SD
device 2.
* The unit cannot be operated with just copying. Follow the procedure to change the database mode correctly
using the "database switch" process.
3 USB output (* not used in the SD card exchange process)
Back up (extract) only the master database of SD1 onto the USB memory device.
* Insert the USB memory device correctly in the front USB terminal. (The side USB port can not be used)
* You can not restore from this backup (extracted) database file.
* Do not use this output function unless it is necessary.
Replacement of SD card, and operation procedure at time of failure
State of the database mode of the SD card after database switch process
SD card of device 1
○ Master database
× Master database
○ -
ー 39 ー
SD card of device 2
Replication database
-
-