Intelligent Controller web settings
7 Would you like to use the function to send an email when an alarm occurs?
□ Yes ⇒ Go to 3
□ No ⇒ Go to 8
8 Do you want the NTP server to automatically adjust the current time?
□ Yes ⇒ Go to 9
□ No ⇒ End of advance check sheet Thank you very much for your cooperation.
9 Please fill in the following details.
NTP server address
[ . . . ]
End of advance check sheet Thank you very much for your cooperation.
3. Confirm email sending function
The Intelligent Controller also has an email sending function when generating/cancelling an alarm, but in order to
use this function, the following environment is required.
□ Email transmission protocol: SMTP (Exchange Server not supported)
If checked OK, go to 1.
1 Have you signed the contract for the e-mail server connection?
□ Yes ⇒ Please fill in the following details.
Outgoing server address for email (SMTP)
[ . . . ]
SenderAccount name
[ ]
Destination account name 1
[ ]
Destination account name 2
[ ]
Destination account name 3
[ ]
Destination account name 4
[ ]
Destination account name 5
[ ]
Destination account name 6
[ ]
Destination account name 7
[ ]
Destination account name 8
[ ]
END
ー 164 ー
Advance check sheet
Thank you very much.