Intelligent Controller web settings
[Network settings] screen
1 DHCP is set to Off.
□ of DHCP On is left blank (unchecked)
2 Set the following IP address for the Intelligent Controller.
IP address obtained for Intelligent Controller
3 Set the following net mask for the Intelligent Controller.
Subnet mask obtained for Intelligent Controller
4 After setting, select the [Register] button.
Setting the PC is unnecessary.
After setting up the network, confirm the network connection referring to "[4] Checking connection to the Web".
XXX.XXX.XXX.XXX
XXX.XXX.XXX.X
ー 170 ー
Web setting
1
2
3