Intelligent Controller web settings
Set the recipient
Set the destination in the "Email Alarm recipient settings" dialogue.
1. Change the settings.
Item
Mail address
Valid
Adaptor CommuErr
I/D unit Disc.
Send test email
2.Touch [Register].
To cancel the settings, touch [Cancel].
z
Set the email address to send alarms emails.
The touchscreen keyboard appears when you touch this and you can change the email address.
Users with a check mark in this column will be sent alarm emails.
Users with a check mark in this column will be sent alarm emails when there is a communica-
tions error with the communication adaptor.
Users with a check mark in this column will be sent alarm emails when an alarm is issned for a
disconnected alarm.
A test email is sent to the set e-mail address. However, a test email is not sent if the setting for
[Valid], [Adaptor CommuErr], or [I/D unit Disc.] has been changed but the change has not been
registered, or if there is not a valid email address.
Outgoing email settings
Explanation
ー 174 ー