Connecting To A Computer (Fam Connection) - Sony PDW-D1 Operation Manual

Laptop computer (with editing
software supporting DVCAM
format installed)

3-2-2 Connecting to a Computer (FAM connection)

1: i.LINK cable (not supplied)
To i.LINK(IEEE1394) connector
For the method of transferring video/audio signals (AV/C data) to a nonlinear
editing system, refer to the manual provided with the editing software to be used.
By connecting this unit to a computer with an FAM (file access
mode) connection, you can use the utility software (see page 46), and
the PDZ-1 Proxy Browsing Software.
The following figure shows an example connection.
Notes
• The FAM driver (see page 29) must be installed in advance.
• Connect only one PDW-D1 unit to a single computer.
1
S400 (i.LINK)
In the PC operation settings dialog box of the
utility software, in the FAM operation
section, set "Login" to "Inhibit" (see page 48).
3-2 Connections and Settings
DC IN
S400
-AC IN
PDW-D1
31