Rear Panel - Sony PDW-D1 Operation Manual

2-2 Rear Panel

1
2
5
4
a DC power inlet connector
When the optional BKP-L551 battery
adaptor is fitted, connect the DC power cord
of the battery adaptor to this connector.
For details, see "To attach a battery pack" (page
33).
b Security slot
You can fit a commercially available
security cable into this slot.
For information about how to use your security
cable, refer to the instructions provided with the
security cable.
c Carrying handle
Use this to carry the unit.
28 2-2 Rear Panel
3
DC IN
S400
-AC IN
6
d AC power switch
Press ~ to power on; press 1 to power off.
e AC power inlet connector
Connect to AC power with a power cord
(not supplied, see page 58).
f
S400 (i.LINK) connector (6-pin,
complying with IEEE1394)
AV/C (Audio/Video Control) connection
(see page 30): Inputs and outputs a
DVCAM format digital video/audio
signal.
FAM (file access mode) connection (see
page 31): Transfers files to and from
computers.
Notes
• If video or audio signals from a computer
connected with the S400 (i.LINK)
connector are not output, disconnect the
i.LINK cable and connect it again,
pushing it straight in.
• When connecting the PDW-D1 to a
computer with a 6-pin i.LINK connector,
connect to the 6-pin i.LINK connector of
the computer first.