Viewing Cartridge Information - Sony StorStation LIB-81 Operating Instructions Manual

Viewing Cartridge Information

1
At the status display, press the [MENU] button for two seconds.
"Information" appears.
2
Select "1.Information", then press the [ENTER] button.
3
Select "1.Library", then press the
[ENTER] button.
The library information is
displayed.
4
Press the [CANCEL] button three times to return to the status display.
Using the Tape Inventory Menu of the control panel, the following information
related to the cartridges can be viewed:
• Bar code information
When the AIT library is equipped with a bar code reader, you can view the bar
code information about the set cartridges by element addresses.
• R-MIC information
When the AIT library is equipped with an R-MIC reader, you can view the
R-MIC information of set AIT-5, AIT-4, AIT-3 Ex, and AIT-3 cartridges, and
AIT-2 cartridges with R-MIC by element address.
Notes
• For information about element addresses, refer to "Assigned Element
Addresses" (page 48) in Chapter 3, "Basic Usage".
• The bar code information and R-MIC information can be viewed through a
browser.
1
At the status display, press the [MENU] button for two seconds.
2
Use the V and v buttons to select "7.Tape Inventory", then press the
[ENTER] button.
"Tape Inventory" appears.
3
To view the bar code information,
select "1.Barcode", then press the
[ENTER] button.
Information
1.Library
2.Drive
V/ID SONY
Name LIB-81
S/N 12345678
Version 0100
Tape Inventory
1.Barcode
2.R-MIC
Chapter 4 Operating the AIT Library
12:34
12:34
60