Configuration Menu - Sony StorStation LIB-81 Operating Instructions Manual

Configuration Menu

The date and time, warning message displayed, bar code, R-MIC and brightness
of the LCD panel can be configured.
t "Basic Settings" (page 43) of this chapter.
The following submenus are in the Configuration Menu.
MENU
Configuration
ENTER
Date & Time
Sequential Mode
LCD Contrast
R-MIC
• "Date & Time"
Set the date and time.
• "Warning"
Set whether or not to display the life warning (given when a specific part has
been operated more times than the specified number of times).
• "Barcode"
If you are using a model equipped with a bar code reader, configure so that the
bar codes affixed to cartridges can be read.
• "R-MIC"
If you are using a model equipped with an R-MIC reader, only enable the
R-MIC function if you use AIT-5, AIT-4, AIT-3 Ex, or AIT-3 cartridges, or
AIT cartridges with R-MIC.
• "LCD Contrast"
Set the brightness of the LCD panel.
• "Sequential Mode"
Activate the sequential mode.
Caution
There exist LIB-81 AIT library models without bar code or R-MIC readers.
Make sure that your library is equipped with a bar code and/or R-MIC reader
before modifying the "Barcode" or "R-MIC" setting. Modifying these settings
when using LIB-81 AIT library models that are not equipped with the
appropriate readers generates errors.
Warning
Bar Code
Chapter 3 Basic Usage
38