Sony StorStation LIB-81 Operating Instructions Manual page 61

When the AIT library is equipped
with a bar code reader, the bar code
information is only displayed when
the bar code setting is "YES" or
"Enable".
• When a cartridge is not set, "No
Tape" is displayed.
• If a cartridge with no bar code
information is set, nothing is
displayed.
• Press the V button to view the
next element address information,
and press the v button to return to
the previous display.
4
To view the R-MIC information, select "2.R-MIC", then press the
[ENTER] button.
The R-MIC information is only
displayed if you are using an AIT-3,
AIT-3 Ex, or AIT-4 model and the
R-MIC setting is "YES" or
"Enable".
• When a cartridge is not set, "No
Tape" is displayed.
• If a cartridge with no R-MIC
information is set, nothing is
displayed.
• Press the V button to view the
next element address information,
and press the v button to return to the previous display.
5
Press the [CANCEL] button three times to return to the status display.
01:12345678
02:No Tape
01:12345678
02:No Tape
Chapter 4 Operating the AIT Library
61