Setting The Scsi Id - Sony StorStation LIB-81 Operating Instructions Manual

Setting the SCSI ID

SCSI Connector 2
SCSI Connector 1
4
Set the month, day, and year.
1 When the month digits flash, use the V and v buttons to set the month,
then press the [ENTER] button.
2 When the day digits flash, use the V and v buttons to set the day, then
press the [ENTER] button.
3 When the year digits flash, use the V and v buttons to set the year then
press the [ENTER] button.
5
Set the hour, minute, and second.
1 When the hour digits flash, use the V and v buttons to set the hour, then
press the [ENTER] button.
2 When the minute digits flash, use the V and v buttons to set the minute,
then press the [ENTER] button.
3 When the second digits flash, use the V and v buttons to set the second
then press the [ENTER] button.
6
When the country flashes, use the V and v buttons to set the country, then
press the [ENTER] button.
7
When "[ENTER] to activate"
appears, press the [ENTER] button.
The date and time and the country
are now set. The display returns to
the menu.
8
Press the [CANCEL] button twice to return to the status display.
Use the SCSI Menu of the control panel to set the SCSI IDs and SCSI parity of
the AIT library and AIT drives.
Library
Controller
About SCSI ID
For each SCSI bus, a unique SCSI ID must be set for the AIT library and AIT
drives. The default factory settings of SCSI IDs are as follows:
• Library: 0
• AIT Drive: 1
Jan/01/2001 12:00:00
Japan
(GMT+ 9:00)
[ENTER] to activate
Library
AIT Drive
Chapter 2 Installation
23