Sony StorStation LIB-81 Operating Instructions Manual page 30

Notes
• After connecting to the network, a browser can be used to change network
settings.
• The AIT library does not support DNS. (You do not need to set the [Host],
[Domain], or [DNS] settings in the procedure below.)
• You can obtain the AIT library's MAC address from the Network Menu.
1
At the status display, press the [MENU] button for two seconds.
2
Use the V and v buttons to select
"6.Network", then press the
[ENTER] button.
"Network" appears.
3
When you want to set the host
name, select "1.Host", then press
the [ENTER] button. (However, the
AIT library does not support DNS,
therefore this setting is
unnecessary.)
4
When the "Host" setting flashes, set
the host name. (However, the AIT
library does not support DNS,
therefore this setting is
unnecessary.)
If no setting has been made, a flashing rectangle appears.
• In order to change the host name, use the V button, the v button, the
[ENTER] button and the [CANCEL] button to enter the new host name,
then press the [ENTER] button. First, make sure that the same host name
does not exist in the same network, then enter the host name.
- Enter the host name up to 63 alphanumeric characters and symbols ( -
. ).
- To delete a character, use space (" ").
5
When [[ENTER] to activate]
appears, press the [ENTER] button.
The display returns to "Network".
6
When you want to set the domain name, select "2.Domain", then press the
[ENTER] button. (However, the AIT library does not support DNS,
therefore this setting is unnecessary.)
7
When the "Domain" setting flashes, set the domain name.
If no setting has been made, a flashing rectangle appears.
• In order to change the domain name, use the V button, the v button, the
[ENTER] button and the [CANCEL] button to enter the new domain
name, then press the [ENTER] button.
- Enter the domain name up to 63 alphanumeric characters and symbols
( - . ).
- To delete a character, use space (" ").
Menu
4.SCSI
5.Configuration
6.Network
Network
1.Host
2.Domain
3.IP Address
Host
■
Host
LIB-81
[ENTER] to activate
Chapter 2 Installation
12:34
12:34
30