Viewing Data On The Internal Hard Disk Using A Computer; Preparing The Hdd Photo Storage And Computer - Sony HDPS-M10 Manual

Viewing data on the internal hard disk
using a computer

Preparing the HDD Photo Storage and computer

This section describes how to connect the unit to a computer using the USB
cable to transfer data between the two devices.
Hints
• When the unit is connected to a computer, you can insert a "Memory Stick" and a
CompactFlash card at the same time and access data from both.
• When the unit is connected to a computer for the first time, the necessary programs are
installed automatically.
1
Turn on the computer.
2
Turn on the unit.
Press the ! (power) button
The message "Welcome to SONY HDPS" appears on the unit display.
3
Open the port cover on the right side of the unit and connect the
supplied USB cable to the
end of the cable to the USB port of your computer.
To the AC outlet
Note
Correct operation is not guaranteed when the unit is connected to a USB hub. Establish
a direct USB connection.
12 GB
(USB) port. Connect the other
To the (USB) port
1
To the USB port of your computer
2